Other information:
1. Speed restriction label
2. Sealant bottle and label with speed
restriction
3. Filling hose from sealant bottle to
wheel
4. Connectors and cable for the power
outlet direct connection
5. Holder for the sealant bottle
6. Compressor
7. On/off switch
8. Pressure gauge for displa ...
Repair procedures
Replacement
1. Disconnect the battery negative cable.
2. Remove the crash pad lower panel. (Refer to Body - "Crash pad lower panel")
3. Disconnect the MDPS ECU connector.
4. Disconnect all connectors connected to the steering column.
5. Loosen the nuts (A) and bo ...