Kia Picanto (JA): Starting System / Starter Relay

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Engine Electrical System / Starting System / Starter Relay

Repair procedures

Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).

4.
Check for continuity between the terminals (30 and 87) using an ohmmeter.
Terminal
Resistance
Measure
30 - 87
1MΩ or higher
If there is continuity between the terminals, replace the relay.

5.
Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
Terminal
Resistance
Measure
30 - 87
1Ω or less
If there is no continuity between the terminals, replace the relay.

6.
Install the starter relay.
7.
Install the fuse box cover.

    Specifications Specification Starter ▷12V, 1.2kW : ISG only Item Specification Rated voltage 12 V, 1.

    Description and operation Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: High Mounted Stop Lamp

    Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate. 3. Loosen the high mounted stop lamp mounting nuts (A). 4. Disconnect the washer nozzle (A) and high mounted stop lamp connector (B). 5. Remove the high mounted stop lamp (C).

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Sunroof Motor

    Repair procedures Inspection 1.Disconnect the negative (-) battery terminal. 2.Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3.Remove the glass motor (A) after loosening the mounting screws. 4.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0213