Kia Picanto JA: Rear parking assist system / Operation of the rear parking assist system

Kia Picanto (JA) 2017-{YEAR} Owner's Manual / Features of your vehicle / Rear parking assist system / Operation of the rear parking assist system

Operating condition

  • This system will activate when backing up with the ignition switch ON. If the vehicle is moving at a speed over 5 km/h (3 mph), the system may not be activated correctly.
  • The sensing distance while the rear parking assist system is in operation is approximately 120 cm (47 in.).
  • When more than two objects are sensed at the same time, the closest one will be recognized first.

NOTICE

The indicator may differ from the illustration as objects or sensors status.

If the indicator blinks, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

    Rear parking assist system

    The rear parking assist system assists the driver during backward movement of the vehicle by chiming if any object is sensed within a distance of 120 cm (47 in...

    Non-operational conditions of rear parking assist system

    The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared...

    Other information:

    Kia Picanto (JA) 2017-2025 Service & Repair Manual: Clutch Release Cylinder


    Repair procedures Removal [Kappa 1.0 T-GDI] 1.Remove the engine room under cover. G 1.0 T-GDI KAPPA (Refer to Engine Mechanical System - "Engine Room Under Cover") 2.Drain the brake fluid through the bleed plug (A).    Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water...

    Kia Picanto (JA) 2017-2025 Owner's Manual: Engine coolant (Kappa 1.0L MPI (Gasoline, FFV), Kappa 1.2L MPI)


    The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate...

    Categories

    LCD window control

    The LCD Window modes can be changed by using the control buttons on the steering wheel.

    - Type A

    1. TRIP : TRIP button for changing modes.
    2. RESET : RESET button for resetting the selected item.

    - Type B

    1. : MODE button for change the LCD MODES
    2. ˄/˅ : MOVE scroll switch for select the items
    3. OK : SET/RESET button for set the items or reset the items

    read more

     
    Copyright © 2025 www.kpicanto.com