| Inspection |
| 1. | Visually check the pipes, hangers and connections for severe corrosion, leaks or damage. |
| 2. | Check for unusual exhaust sounds or abnormal exhaust fumes. |
Repair procedures Inspection Engine Oil Level Be sure that the vehicle is on level ground. 1. Warm up and stop the engine, and then wait for 5 minutes.
Repair procedures Inspection Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
Repair procedures Inspection 1.Disconnect the negative (-) battery terminal. 2.Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3.Remove the glass motor (A) after loosening the mounting screws. 4.
Repair procedures Inspection 1.Ignition "ON" 2.Manually operate the control switch and measure the voltage of blower motor. 3.Select the control switch to raise voltage until high speed. Fan Motor Voltage ManualFirst speed3.