Kia Picanto (JA): Drive Belt System / Drive Belt

Kia Picanto (JA) 2017-2026 Service & Repair Manual / Engine Mechanical System / Drive Belt System / Drive Belt

Repair procedures

Removal and Installation
1.
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")
2.
Using the wrench, turning the auto tensioner pulley (A) counterclockwise and then insert a stopper pin (B) into the hole.

3.
Remove the drive belt (A).

4.
Install in the reverse order of removal.
Inspection
1.
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
   
Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.

    Repair procedures Removal and Installation 1.Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Keyless Entry And Burglar Alarm

    Specifications Specification Item Specification Power source 3 V Operating temperature -22 - 167°F (-30 - 75°C) RF Modulation FSK LF Modulation ASK RF frequency 433.92 MHz Button number 3 Function Door lock Door unlock Tailgate unlock Components and components locat

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Windshield Wiper/Washer

    Components and components location Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose & nozzle 4. Wiper motor & linkage assembly 5. Washer motor 6. Washer reservoir tank 7. Wiper/Washer relay 8.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0257