Kia Picanto (JA): Manual climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

Kia Picanto (JA) 2017-2026 Owner's Manual / Features of your vehicle / Manual climate control system / Checking the amount of air conditioner refrigerant and compressor lubricant

When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also has a bad influence on the air conditioning system. Therefore, if abnormal operation is found, have the system inspected by a professional workshop.

Kia recommends to visit an authorized Kia dealer/service partner.

WARNING

Vehicles equipped with R-134a*

Because the refrigerant is at very high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant is used.

Otherwise, it may cause damage to the vehicle and personal injury.

WARNING

n Vehicles equipped with R-1234yf**

Because the refrigerant is mildly inflammable and at very high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant is used.

Otherwise, it may cause damage to the vehicle and personal injury.

    Each symbols and specification on air conditioning refrigerant label means as below ; 1. Classification of refrigerant 2. Amount of refrigerant 3.

    1. Temperature control knob 2. AUTO (automatic control) button 3. Climate control display 4. Fan speed control knob 5. OFF button 6. Front windshield defroster button 7.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Immobilizer Control Unit

    Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the main crash pad assembly. (Refer to Body - "Main Crash Pad Assembly") 3.Disconnect the connector of the immobilizer unit and then remove the immobilizer unit (A) after loosening a bolt.

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Power Mosfet

    Repair procedures Inspection 1.Ignition "ON" 2.Manually operate the control switch and measure the voltage of blower motor. 3.Select the control switch to raise voltage until high speed. Fan Motor Voltage ManualFirst speed3.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0177