| Replacement |
| 1. | Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
|
| 2. | Remove the front door belt inside weatherstrip (A).
|
| 3. | Install in the reverse order of removal.
|
Components and components location Component Location 1. Front door latch Repair procedures Replacement Put on gloves to protect your hands.
Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).
Components and components location Components Repair procedures Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the map lamp lens (A). 3. Remove the map lamp (B) after loosening the mounting screws. 4.