Kia Picanto (JA): Radar type autonomous emergency braking / Brake operation

  • In an urgent situation, the braking system enters into the ready status for prompt reaction against the driver’s depressing the brake pedal.
  • The AEB provides additional braking power for optimum braking performance, when the driver depresses the brake pedal.
  • The braking control is automatically deactivated, when the driver sharply depresses the accelerator pedal, or when the driver abruptly operates the steering wheel.
  • The braking control is automatically canceled, when risk factors disappear.

CAUTION

The driver should always pay great caution to vehicle operation, even though there is no warning message or warning alarm.

WARNING

The AEB cannot avoid all collisions. The AEB might not completely stop the vehicle before collision, due to ambient, weather and road conditions. The driver has the responsibility to drive safely and control the vehicle.

WARNING

The AEB operates in accordance with the risk levels, such as the distance from the vehicle in front, the speed of the vehicle in front, and the driver's vehicle operation. For the system to operate, do not attempt risky driving.

    The AEB produces warning messages and warning alarms in accordance with the collision risk levels of followings like vehicle’s sudden braking in front or lack of vehicle to vehicle distance.

    The sensor is to maintain a certain distance from the vehicle in front. However, the smudged sensor with foreign substances, such as snow and rain, adversely affects the sensing performance.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Seat Heater Switch

    Components and components location Components 1. Driver side seat heater switch 2. Passenger side seat heater switch Schematic diagrams Circuit Diagram Repair procedures Removal 1. Disconnect the negative (-) battery terminal.

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Front Washer Motor

    Repair procedures Inspection Front Washer Motor 1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water.    • Before filling the reservoir tank with water, check the filter for foreign material or contamination.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0169