Kia Picanto: Crash Pad / Cluster Fascia Panel

Kia Picanto JA 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel

Components and components location
Component Location

1. Cluster fascia panel assembly


Repair procedures
Replacement
   
Put on gloves to protect your hands.
   
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Be careful not to bend or scratch the trim and panels.
1.
Remove the cluster fascia panel (A) by using a remover.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Crash Pad
Components and components location Components 1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side air vent duct assembly [RH] 5. Crash pad cente ...

Center Fascia Panel
Components and components location Component Location 1. Center fascia panel assembly Repair procedures Replacement    Put on gloves to protect your ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Crash Pad


Components and components location Components 1. Cowl cross bar assembly 2. Main wiring harness 3. Main crash pad assembly 4. Side air vent duct assembly [RH] 5. Crash pad center lower panel assembly 6. Crash pad center fascia garnish 7. Glove box complete 8. Heater c ...

Kia Picanto JA 2017-2025 Owner's Manual: Distributing the sealant


13. Immediately drive approximately 7~10 km (4~6 miles or, about 10 min) to evenly distribute the sealant in the tire. CAUTION Do not exceed a speed of 60 km/h (35 miles). If possible, do not fall below a speed of 20 km/h (12 miles). While driving, if you experience any unusual vibrat ...

Copyright © www.kpicanto.com 2017-2025