Kia Picanto (JA): Cruise control system / To set cruise control speed
1. Press the cruise
/ CRUISE
button
on the steering wheel, to turn the
system on. The cruise indicator
light will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
NOTICE
Manual transaxle
For manual transaxle vehicles, you should depress the brake pedal at least once to set the cruise control after starting the engine.
3. Move the lever down (to SET-), and release it at the desired speed. The cruise set indicator light will illuminate. Release the accelerator pedal at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down or speed up slightly while going downhill.
O / CANCEL: Cancels cruise control operation. CRUISE / : Turns cruise control system on or off. RES+: Resumes or increases cruise control speed.
Follow either of these procedures: Move the lever up (to RES+) and hold it. Your vehicle will accelerate. Release the lever at the speed you want.
Other information:
Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Motor
Repair procedures Inspection 1. Connect the battery voltage and check the blower motor rotation. 2. If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. 3. If the problem is corrected, replace the blower motor.
Kia Picanto (JA) 2017-2026 Service & Repair Manual: Blower Resistor (Manual)
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.Disconnect the negative (-) battery terminal.
Categories
- Manuals Home
- Kia Picanto Owners Manual
- Kia Picanto Service Manual
- Brake System
- Charging System
- Body Electrical System
- New on site
- Most important about car
