Kia Picanto: Light bulbs / Tailgate room lamp bulb
replacement

1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp
housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
CAUTION
Be careful not to dirty or damage
the lens, lens tab, and plastic housings.
1. Using a flat-blade screwdriver, gently
pry the lamp assembly from interior.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Install the lamp assembly ...
Headlamp aiming
1. Inflate the tires to the specified
pressure and remove any loads
from the vehicle except the driver,
spare tire, and tools.
2. The vehicle should be placed on a
flat flo ...
Other information:
The heating and cooling system can be
controlled manually by pushing buttons
other than the AUTO button. In this
case, the system works sequentially
according to the order of buttons selected.
When pressing any button (or turning
any knob) except the AUTO button
while using automatic op ...
Components and components location
Components
Repair procedures
Inspection
1. Disconnect the negative (-) battery terminal.
2. Remove the map lamp lens (A).
3. Remove the map lamp (B) after loosening the mounting screws.
4. Check for continuity between the terminals. I ...