Kia Picanto: Smart Key System / Smart Key
Repair procedures
| Smart Key |
Smart Key Code Saving
| 1. | Connect
the DLC cable of KDS/GDS to the data link connector (16 pins) in driver
side crash pad lower panel, turn the power on KDS/GDS.
|
| 2. | Select the vehicle model and then do "Smart key code saving".
|
| 3. | After selecting "Smart key teaching" menu, push "Enter" key, then the screen will be shown as below.
|
| 4. | After having the teaching smart key, push "ENTER" key. |
| 5. | Input the "Pin code" for first key teaching.
|
| 6. | Press the SSB with smart key within 5 sec after pressing "OK".
|
| 7. | Confirm the message "First key teaching completed".
|
| 8. | Press the SSB with smart key within 5 sec after pressing "OK".
|
| 9. | Confirm the message "Second key teaching completed".
|
| 10. | Then the screen will be shown as below when key teaching process is completed.
|
Smart Key System
Specifications
Specifications
Smart Key Unit
Items
Specification
Rated voltage DC 12 V Operating voltage DC 9 - 16 V Operating ...
Smart Key Unit
Components and components location
Components
Connector Pin Information
No.
Connector A
Connector B
...
Other information:
Kia Picanto JA 2017-2025 Service & Repair Manual: Front Axle Assembly
Components and components location Components 1. Snap ring 2. Bearing 3. Axle assembly 4. Brake disc dust cover 5. Wheel hub assembly 6. Wheel brake disc 7. Brake disc fixing screw 8. Wheel / Tire 9. Wheel nut Repair procedures Removal 1. Remove the front/rear wheel tire (A ...
Kia Picanto JA 2017-2025 Owner's Manual: Tire replacement
If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 in.) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replaci ...
Copyright © www.kpicanto.com 2017-2025
