Kia Picanto (JA): Tire Pressure Monitoring System (TPMS) / Tire Pressure Monitoring System malfunction

The TPMS malfunction indicator will illuminate ( ) after it blinks for approximately 1 minute when there is a problem with the Tire Pressure Monitoring System. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.

If the indicator remains illuminated or illuminates even after TPMS setting, have the system checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.

WARNING

  • If there is a malfunction with the TPMS, low tire pressure will not be indicated. In this case, have the system serviced by a professional workshop. Kia recommends to visit an authorized Kia dealer/service partner.
  • If the system does not work due to TPMS removal or installation of related parts with different specification, it might be a problem when the vehicle is being regularly inspected.
  • When repairing TPMS related parts, be sure to replace them to parts with original specification or those which satisfy the TPMS regulation. - TPMS related parts : Tire, wheel, ABS unit, suspension

WARNING

FOR EUROPE

Do not modify the vehicle. It may interfere with the TPMS function.

❈ All vehicles sold in the EUROPE market during below period must be equipped with TPMS.

- New model vehicle : Nov. 1, 2012 ~
- Current model vehicle : Nov. 1, 2014~(Based on vehicle registrations)

Reference : Indicator Light Status

    The ( ) warning light will illuminate when an under-inflated tire is indicated. In certain types, the above message might be displayed on the cluster.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Glass Defogger Printed Heater

    Repair procedures Inspection    • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressure on the tin foil with hand and move the tin foil along the grid line to check for open circuits.

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Rear Washer Switch

    Repair procedures Inspection Multifunction Switch Inspection 1. Check for continuity between the terminals in each switch position as shown below. Rear Wiper & Washer Switch[LHD] [RHD] Inspection (With KDS/GDS) 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS/GDS).

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0289