With the door lock button

WARNING
Door lock malfunction
If a power door lock ever fails to function while you are in the vehicle, try one or more of the following techniques to exit:
WARNING
Do not pull the inner door handle of driver's (or passenger's) door while the vehicle is moving.
With central door lock switch

Operate by pressing the central door lock switch.
)
portion (1) of
the switch, all vehicle doors will lock.
)
portion (2) of
the switch, all vehicle doors will unlock.
) portion
(1)
of the central door lock switch is
pressed.WARNING
Doors
WARNING
Unlocked vehicles
Leaving your vehicle unlocked can invite theft or possible harm to you or others from someone hiding in your vehicle while you are gone. Always remove the ignition key, engage the parking brake, close all windows and lock all doors when leaving your vehicle unattended.
WARNING
Unattended children
An enclosed vehicle can become extremely hot, causing death or severe injury to unattended children or animals who cannot escape the vehicle. Furthermore, children might operate features of the vehicle that could injure them, or they could encounter other harm, possibly from someone gaining entry to the vehicle. Never leave children or animals unattended in your vehicle.
Impact sensing door unlock system
All doors will automatically unlock after an impact causes the air bags to deploy.
Speed sensing door lock system
All doors will be automatically locked after the vehicle speed exceeds 15 km/h. And all doors will be automatically unlocked when you turn the engine off and when you remove the ignition key.
Mechanical key Turn the key toward the rear of the vehicle to lock and toward the front of the vehicle to unlock. If you lock/unlock the door with a key, the doors will lock/unlock.
prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.
Specifications Specification Item Specification Ultrasonic sensor Voltage rating DC 12V Detecting range 11.8 - 39.3 in (30 - 100 cm) Operation voltage DC 9 - 16 V Operation current 60mA Max.
Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally.