
1. Push the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically according to the temperature setting.

2. Set the temperature control knob to set the desired temperature.
NOTICE

NOTICE
Never place anything over the sensor located on the instrument panel to ensure better control of the heating and cooling system.
1. Temperature control knob 2. AUTO (automatic control) button 3. Climate control display 4. Fan speed control knob 5. OFF button 6. Front windshield defroster button 7.
The heating and cooling system can be controlled manually by pushing buttons other than the AUTO button. In this case, the system works sequentially according to the order of buttons selected.
Repair procedures Inspection Rear Wiper Motor 1.Remove the connector from the rear wiper motor. 2.Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively. 3.Check that the motor operates normally.
Repair procedures Inspection 1.With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign material or contamination.