Kia Picanto: Instrument cluster / Instrument cluster control
Adjusting Instrument Cluster
Illumination

WARNING
Never adjust the instrument cluster
while driving. This could result in loss
of control and lead to an accident
that may cause death, serious injury,
or property damage.
The brightness of the instrument panel
illumination is changed by rotating the
illumination control knob (“+” or “-”)
when the ignition switch or Engine
Start/Stop button is ON, or the tail
lights are turned on.

The brightness of the instrument panel
illumination is displayed (Type B Cluster).
If the brightness reaches to the
maxi mum or minimum level, an alarm
will sound (if equipped).
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. Warning and indicator lights
6. LCD display
❈ The actual cluster in the vehicle
may differ from the illust ...
The LCD Window modes can be
changed by using the control buttons
on the steering wheel.
- Type A
1. TRIP : TRIP button for changing
modes.
2. RESET : RESET button for resetting
the selec ...
Other information:
If your temperature gauge indicates
overheating, you will experience a loss
of power, or hear loud pinging or knocking,
the engine is probably too hot. If
this happens, you should:
1. Pull off the road and stop as soon
as it is safe to do so.
2. Place the shift lever in P (automatic
tr ...
If any method other than the cruise /
CRUISE button was used to cancel
cruising speed and the system is still
activated, the most recent set speed
will automatically resume when you
move the lever up (to RES+).
It will not resume, however, if the vehicle
speed has dropped below approx ...