| Replacement |
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the heater unit.
(Refer to Heater - "Heater Unit")
|
| 3. | Remove the Evaporator temperature sensor.
(Refer to Air Conditioning System - "Evaporator Temperature Sensor")
|
| 4. | Remove the heater unit lower case (A) after loosening the mounting screws.
|
| 5. | Remove the evaporator core (A) from the heater unit. |
| 6. | Install in the reverse order of removal. |
Repair procedures Replacement 1.Disconnect the negative (-) battery terminal. 2.Remove the heater unit. (Refer to Heater - "Heater Unit") 3.
Repair procedures Inspection • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressure on the tin foil with hand and move the tin foil along the grid line to check for open circuits.
Components and components location Components Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly") 3.Disconnect the connector (A) from the ultrasonic sensor.