Kia Picanto: ISG (Idle Stop & Go) System / Door switch
Description and operation
| Description |
Via
the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat
belt/door, the ISG function reacts as follows. If the seat belt or door
is opened, the engine must not be started or stopped by the ISG
function for safety reasons.
Repair procedures
| Inspection |
| 1. | Remove the center pillar lower trim.
(Refer to Body - "Center Pillar Trim")
|
| 2. | Check for continuity between the terminal.
|
Brake switch
Components and components location
Components
1. Brake member assembly 2. Stop lamp switch 3. Brake pedal arm assembly 4. Brake pedal pad
Troubleshooting
Troubleshooting
1. ...
Seat belt switch
Components and components location
Component Location
1. Front seat belt buckle
Repair procedures
Replacement
1.Remove the front seat assembly.
(Refer to Front ...
Other information:
Kia Picanto JA 2017-2025 Service & Repair Manual: Rear Door Power Window Regulator
Components and components location Component Location 1. Rear door module Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior ...
Kia Picanto JA 2017-2025 Service & Repair Manual: Front Wheel Speed Sensor
Repair procedures Removal 1. Remove the wheel tire (A). Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) 2. Loosen the wheel speed sensor bracket bolts (A),(B) and then disconnect the wheel speed sensor connector (C). 3. Install ...
Copyright © www.kpicanto.com 2017-2025
