Kia Picanto: Button Engine Start System / Start/Stop Button

Kia Picanto JA 2017-2024 Service & Repair Manual / Body Electrical System / Button Engine Start System / Start/Stop Button

Components and components location
Component

Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the steering column shroud lower panel.
(Refer to Body - "Steering Column Shroud Panel")
4.
Remove the start/stop button (A) by pushing it out from the inside with hands.

5.
Disconnect the start/stop button connector (A).

Installation
1.
Connect the start/stop button connector.
2.
Install the start/stop button.
3.
Install the steering column shroud lower panel.
4.
Install the crash pad lower panel.
5.
Connect the negative (-) battery terminal.
Button Engine Start System
Components and components location Component Location 1. Body control module (BCM) 2. Smart key unit (SMK) 3. Interior antenna 1 4. Interior antenna 2 5. FOB key 6. Start Stop Button ( ...

ESCL(Electronic Steering Column Lock)
Components and components location Component Repair procedures Removal 1.Disconnect the negative(-) battery terminal. 2.Remove the crash pad lower panel. (Refer to Bod ...

Other information:

Kia Picanto JA 2017-2024 Owner's Manual: Checking the tire inflation pressure


1. After driving approximately 7~10 km (4~6 miles or about 10 minutes), stop at a suitable location. 2. Connect the filling hose (3) of the compressor (clip mounted side) directly and then connect the filling hose (3) (opposite side) to the tire valve. 3. Connect between compressor and ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Rear Glass Defogger Printed Heater


Repair procedures Inspection    • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressure on the tin foil with hand and move the tin foil along the grid line to check for open circuits. ...

Copyright © www.kpicanto.com 2017-2024