Kia Picanto: Seat Electrical / Seat Heater

Kia Picanto JA 2017-2025 Service & Repair Manual / Body Electrical System / Seat Electrical / Seat Heater

Components and components location
Component Location

1. Seat heater unit
2. Front seat back heater
3. Front seat cushion heater

Schematic diagrams
Circuit Diagram

Repair procedures
Inspection
1.
Check for continuity and measure the resistance between terminals No 1 and No 4.

Standard value
Driver / Assists (cushion + back)
2.19Ω±10%
2.
Operate the seat heater after connecting the connector, and then check the thermostat by measuring the temperature of seat surface.
Standard value
1st : cushion : 38±2°C, back : 45±2°C
2st : cushion : 42±2°C, back : 50±2°C
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Disconnect the seat heater unit connector (A).

4.
Remove the seat heater unit (A) after loosening the mounting screws.

Installation
1.
Install the seat heater unit and connecting the connector.
2.
Install the front seat assembly.
3.
Connect the negative (-) battery terminal.
Seat Electrical
...

Seat Heater Switch
Components and components location Components 1. Driver side seat heater switch 2. Passenger side seat heater switch Schematic diagrams Circuit Diagram Repair proce ...

Other information:

Kia Picanto JA 2017-2025 Owner's Manual: 3. Exhaust emission control system


The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performance. Vehicle modifications This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and m ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Heated Oxygen Sensor (HO2S)


Specifications Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.5 - 4.0 [20°C(68°F)] Type Linear Pin 6 HO2S [Bank 1/Sensor 2] Item ...

Copyright © www.kpicanto.com 2017-2025