Kia Picanto: Body Side Molding / Roof Side Molding

Kia Picanto JA 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Body Side Molding / Roof Side Molding

Repair procedures
Replacement
   
Put on gloves to protect your hands.
   
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Using a remover, remove the roof side molding (A).
   
Always replace the roof side molding with a new one.

2.
Install in the reverse order of removal.
   
First assemble the clip ⓐ and then assemble the other clips from the ⓐ to ⓖ direction in sequence order.
Body Side Molding
...

Delta Garnish
Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove int ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Front Wiper Motor


Components and components location Component Location 1. Cap 2. Nut 3. Wiper arm & blade 4. Cowl top cover 5. Bolt 6. Wiper motor & linkage assembly 7. Wiper motor connector Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.If necessary, ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Oil Cooler


Repair procedures Removal 1.Remove the engine room under cover. (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover") 2.Drain the coolant. (Refer to Cooling System - "Coolant") 3.Disconnect the oil cooler coolant hoses (A). 4.Remove the ...

Copyright © www.kpicanto.com 2017-2025