Other information:
Repair procedures
Replacement
1.Remove the crankshaft damper pulley.
(Refer to Drive Belt System - "Crankshaft Damper Pulley")
2.Remove the crankshaft front oil seal (A).
3.Using the SST (09214-1R100, 09231-H1100), install a new front oil seal, apply engine ...
The ISG system will operate under
the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and hood are closed.
- The brake vacuum pressure is adequate.
- The battery is sufficiently charged.
- The outside temperature is more
than -2°C (28.4°F).
- The o ...