Kia Picanto: Audio / Multimedia Jack
Schematic diagrams
Description and operation
The
multimedia jack on the console upper cover is for customers who like to
listen to external portable music players like the MP3 etc., through
the vehicle's sound system when it is linked to this jack. The customer
has this added option.
In
case of distorted sound coming from the AUX-linked external music
players, the audio unit may not be defective but the output level of the
player does not match the specification of the AUX.
Repair procedures
Put on gloves to protect your hands. |
•
| When
prying with a flat-tip screwdriver or use a prying trim tool, wrap it
with protective tape, and apply protective tape around the related
parts, to prevent damage. |
•
| Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. |
•
| Take care not to bend or scratch the trim and panels. |
|
1. | Disconnect the negative (-) battery terminal. |
2. | Using a screwdriver or remover, remove the floor console front bezel (A).
|
3. | Disconnect the connectors (A) from floor console front bezel.
|
4. | Remove the multimedia jack (A) after releasing the fixed hooks.
|
1. | Install the multimedia jack. |
2. | Connect the connectors from the floor console front bezel. |
3. | Install the floor console front bezel. |
4. | Connect the negative (-) battery terminal. •
| Make sure the multimedia connector and the console front tray connectors are plugged in properly. |
•
| Check the audio system for normal operation. |
|
|
Components and components location
Components
1. Left Remote Control Switch (Audio + Hands free + Voice) 2. Right Remote Control Switch (Cruise+Trip Computer)
Schematic diagrams
...
Specifications
Specifications
Items
Specifications
Rated voltage 5V Load Max. 1mA (Relay load) Illuminations (LUX) 50 1.22 ± 0. ...
Other information:
Components and components location
Component Location
1. Front seat belt retractor
Repair procedures
Replacement
1.Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim")
2.Remove the front seat belt upper anchor (A) af ...
Repair procedures
Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the front bumper assembly.
(Refer to Body - "Front Bumper Assembly")
3.Remove the front fog lamp assembly (A) after loosening the mounting screws.
Bulb Replacement
1.Remove the engine ...