Kia Picanto: Emission Control System / Exhaust Emission Control System
Description and operation
Exhaust
emissions (CO, HC, NOx) are controlled by a combination of engine
modifications and the addition of special control components.
Modifications to the combustion chamber, intake manifold, camshaft and ignition system consist the basic control system.
These
items have been integrated into a highly effective system which
controls exhaust emissions while maintaining good drivability and fuel
economy.
Description and operation
Description
A
ratchet tightening device on the threaded fuel filler cap reduces the
chances of incorrect installation, which would seal the fuel filler.
After the ...
Description and operation
Description
The
Gasoline Particulate Filter (GPF) system prevents Particulate Matter
(PM) from being discharged to the atmosphere and consists of a filter
assembl ...
Other information:
If your vehicle is FFV (Flex fuel vehicle),
it needs to be checked and the reservoir
should be filled in with the gasoline
for cold start when the outside temperature
is low (below 20°C).
The nominal capacity of the gasoline
reservoir for cold start is 0.8 liters and
the reservoir is ...
Components and components location
Components
[Kappa 1.0 T-GDI]
1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch regulator 5. Clutch tube
Repair procedures
Removal
1.Turn ignition switch OFF and disconnect the negative (-) battery ...