Kia Picanto: Tires/Wheels / Wheel
Repair procedures
Hub nut tightening sequence |
Tighten the hub nuts as follows.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) |
When using an impact gun, final tightening torque should be checked using a torque wrench. |
Run out inspection
2. | Measure the wheel run-out by using a dial indicator as illustration below.
Run-out
|
Aluminum
| Radial mm (in.)
| Below 0.3 (0.0118)
| Lateral mm (in.)
| Below 0.3 (0.0118)
|
|
3. | If measured value exceeds the standard value, replace the wheel.
|
Repair procedures
Tire Wear
•
Using
tires and wheels other than the recommended sizes can cause unusual
handling characteristics and poor ...
Repair procedures
Front wheel alignment
When
using a commercially available computerized wheel alignment equipment
to inspect the front wheel alignment, always positio ...
Other information:
1. Driver’s door power window switch
2. Front passenger’s door power window
switch
3. Rear door (left) power window
switch
4. Rear door (right) power window
switch
5. Window opening and closing
6. Automatic power window up * /
down
7. Power window lock switch
NOTICE
In co ...
Specifications
Specification
Motor
Item
Specification
Max Current (A) < 6.0 Coil Resistance (Ω) 2.4 ± 0.36 Supply Voltage (V) 13.5 Supply Voltage Range (V) 9 - 16 Operating Frequency (kHz) 0.9 - 1.1
Sensor
...