Kia Picanto: Cylinder Head Assembly / Vacuum Pump

Kia Picanto JA 2017-2023 Service & Repair Manual / Engine Mechanical System / Cylinder Head Assembly / Vacuum Pump

Repair procedures
Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Disconnect the wiring connectors and harness clamps and remove the connector brackets around the vacuum pump.

3.
Remove the air cleaner assembly.
(Refer to Intake and Exhaust System - "Air Cleaner")
4.
Disconnect the brake booster vacuum hose (A).

5.
Remove the wiring bracket (A) and then remove the vacuum pump (B).
Tightening torque :
18.6 - 22.6 N·m (1.9 - 2.3 kgf·m, 13.7 - 16.6 lb·ft)

6.
Install in the reverse order of removal.
Cylinder Head Cover
Components and components location Components 1. Oil filler cap 2. Cylinder head cover 3. Cylinder head cover gasket Repair procedures Removal    • ...

CVVT & Camshaft
Description and operation Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control ...

Other information:

Kia Picanto JA 2017-2023 Service & Repair Manual: Front Seat


Components and components location Components 1. Front seat inner shield cover 2. Front seat headrest 3. Front seat back covering 4. Front seat armrest 5. Front seat back heater 6. Front seat back pad 7. Front seat headrest guide 8. Front seat back support pad 9. Fr ...

Kia Picanto JA 2017-2023 Owner's Manual: Non-operational conditions of rear parking assist system


The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normal ...

Copyright © www.kpicanto.com 2017-2023