Kia Picanto: Lighting System / Turn Signal Lamp

Kia Picanto JA 2017-2025 Service & Repair Manual / Body Electrical System / Lighting System / Turn Signal Lamp

Repair procedures
Removal
Door Mirror Turn Signal Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mirror (A) from the mirror holder.

   
Be careful not to damage the fixing clips (A).

3.
Disconnect the heating connectors (A) from the mirror.

4.
Remove the door mirror cover (A) after separating the mounting clips.

   
Be careful not to damage the fixing clips (A).

5.
Remove the door mirror housing (A) after loosening the mounting screw.

6.
Remove the door mirror turn signal lamp (A) after loosening the screw.

7.
Disconnect the connector (A) from the door mirror turn signal lamp (B).

Installation
1.
Install the door mirror turn signal lamp.
2.
Install the door mirror housing.
3.
Install the door mirror cover.
4.
Install the door mirror.
5.
Connect the negative (-) battery terminal.
Headlamps
Description and operation Description BI-FUNCTION 1. Definition – A headlamp with integrated functions of high and low beam – The lig ...

Map Lamp
Repair procedures Removal    • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver ...

Other information:

Kia Picanto JA 2017-2025 Owner's Manual: Highway driving


Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may result in reduced traction or tire failure. NOTICE Never exceed the maximum tire inflatio ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Front Seat Assembly


Components and components location Component Location 1. Front seat assembly Repair procedures Replacement 1. Loosen the front seat mounting bolts (A). Tightening torque : 49.0 - 58.8 N·m (5.0 - 6.0 kgf·m, 36.2 - 43.4 lb·ft) [Front] ...

Copyright © www.kpicanto.com 2017-2025