Kia Picanto: Cruise control system / To set cruise control speed

1. Press the cruise
/ CRUISE
button
on the steering wheel, to turn the
system on. The cruise indicator
light will illuminate.
2. Accelerate to the desired speed,
which must be more than 30 km/h
(20 mph).
NOTICE
Manual transaxle
For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.

3. Move the lever down (to SET-), and
release it at the desired speed. The
cruise set indicator light will illuminate.
Release the accelerator pedal
at the same time. The desired
speed will automatically be maintained.
On a steep grade, the vehicle may
slow down or speed up slightly
while going downhill.
O / CANCEL:
Cancels cruise control operation.
CRUISE /
:
Turns cruise control system
on or off.
RES+: Resumes or increases
cruise control speed.
SET-: Sets or decreases cruise
contro ...
Follow either of these procedures:
Move the lever up (to RES+) and hold
it. Your vehicle will accelerate. Release
the lever at the speed you
want.
Move the lever up (to RES+) and rele ...
Other information:
Repair procedures
Replacement
1.Remove the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
2.Remove the flywheel.
(Refer to Cylinder Block Assembly - "Flywheel")
3.Remove the rear oil seal (A).
4.Using
the SST (09214-0310 ...
Components and components location
Components
1. Rear door trim assembly 2. Rear door trim mounting bracket 3. Rear door panel complete 4. Rear door body side weatherstrip 5. Rear door side weatherstrip 6. Rear door belt outside weatherstrip 7. Rear door belt inside wea ...