Kia Picanto: Cruise control system / To cancel cruise control, do one
of the following
- Depress the brake pedal.
- Depress the clutch pedal if equipped
with a manual transaxle.
- Shift into N (Neutral) if equipped with
an automatic transaxle.
- Press the O/CANCEL switch located
on the steering wheel.
- Decrease the vehicle speed lower
than the memory speed by 20 km/h
(12 mph).
- Decrease the vehicle speed to less
than approximately 30 km/h
(20 mph).
Each of these actions will cancel cruise
control operation (the cruise set indicator
light will go off), but it will not turn
the system off. If you wish to resume
cruise control operation, move up the
lever (to RES+) located on your steering
wheel. You will return to your previously
preset speed.
Follow either of these procedures:
Move the lever down (to SET-) and
hold it. Your vehicle will gradually
slow down. Release the lever at the
speed you want to maintain.
Move the leve ...
If any method other than the cruise /
CRUISE button was used to cancel
cruising speed and the system is still
activated, the most recent set speed
will automatically resume when you
move t ...
Other information:
Repair procedures
Removal and Installation
1.Disconnect the negative battery terminal.
2.Remove the engine room under cover and RH side cover.
(Refer to Engine and Transaxle Assembly - “Engine Room Under Cover”)
3.Drain the coolant.
(Refer to Cooling System - ...
The system may not operate
when:
- The ISG related sensors or system
error occurs.
The yellow AUTO STOP indicator ()
on
the instrument cluster will stay on after
blinking for 5 seconds and the light
on the ISG OFF button will illuminate.
NOTICE
If the ISG OFF button light is not ...