Kia Picanto: Specifications & Consumer information / Tire specification and pressure label, Engine number, Air conditioner compressor label

Kia Picanto JA 2017-2025 Owner's Manual / Specifications & Consumer information / Tire specification and pressure label, Engine number, Air conditioner compressor label

Tire specification and pressure label

The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.

The tire label located on the driver's side center pillar gives the tire pressures recommended for your car.

Engine number

The engine number is stamped on the engine block as shown in the drawing.

Air conditioner compressor label

A compressor label informs you the type of compressor your vehicle is equipped with such as model, supplier part number, production number, refrigerant (1) and refrigerant oil (2).

Vehicle Identification Number (VIN), Vehicle certification label

Vehicle Identification Number (VIN) The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number i ...

Refrigerant label, Declaration of conformity, Fuel label

Refrigerant label The refrigerant label is located on the underside of the hood. Declaration of conformity The radio frequency components of the vehicle comply with requirements and other ...

Other information:

Kia Picanto JA 2017-2025 Owner's Manual: If the engine will not start

If engine doesn't turn over or turns over slowly 1. If your vehicle has an automatic transaxle, be sure the shift lever is in N (Neutral) or P (Park) and the emergency brake is set. 2. Check the battery connections to be sure they are clean and tight. 3. Turn on the interior light. If t ...

Kia Picanto JA 2017-2025 Owner's Manual: Map lamp bulb replacement

WARNING Prior to working on the Interior lamps, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock. 1. Using a flat-blade screwdriver, gently pry the lens cover from lamp housing. 2. Remove the bulb by pulling it straight out. ...