Kia Picanto: Tailgate / Tailgate Latch
Components and components location
1. Tailgate latch assembly
|
Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the tailgate trim.
(Refer to Tailgate - " Tailgate Trim")
|
2. | Disconnect the tailgate latch connector (A).
|
3. | Remove the tailgate latch assembly (B) after loosening the mounting bolts (A).
Tightening torque :
10.8 - 11.8 N·m (1.1 - 1.2 kgf·m, 8.0 - 8.7 lb·ft) |
|
4. | Install in the reverse order of removal. •
| Make sure that the tailgate locks/unlocks and opens/closes properly. |
•
| Adjust the tailgate alignment. |
•
| Make sure the connectors are connected in properly. |
|
|
Components and components location
Component Location
1. Tailgate trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Repair procedures
Replacement
Be
careful as the tailgate may fall down on people when the lifts are
removed. Have a helper hold the tailgate open, or use a secure meth ...
Other information:
Specifications
Specification
Accelerator
Position
Output Voltage (V) [Vref = 5V]
APS1
APS2
C.T 0.7 - 0.8 0.32 - 0.42 W.O.T 3.98 - 4. ...
Components and components location
Components
1. HECU 2. Cluster 3. TPMS SET Switch 4. Wheel speed sensor 5. Tone wheel
Description and operation
Description
Indirect Tire Pressure Monitoring System (TPMS)
Using
a wheel speed signal from the ESC, the system analyzes the ...