Kia Picanto: Tailgate / Tailgate Assembly
Components and components location
Repair procedures
Wear gloves to protect hands from injury. |
Work in a group of two when removing and installing the tailgate. |
1. | Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Pillar Trim")
|
2. | Disconnect the washer nozzle hose (A) and high mounted stop lamp connector (B).
|
3. | Remove the tailgate trim.
(Refer to Tailgate Trim - "Tailgate Trim")
|
4. | Using a screwdriver, lift the socket clips (A) up slightly on both ends of the tailgate lifter (B).
|
5. | Disconnect the connectors and tailgate wiring harness. |
6. | Remove the tailgate assembly (A) after loosening the mounting bolts.
Tightening torque :
21.6 - 26.5 N·m (2.2 - 2.7 kgf·m, 15.9 - 19.5 lb·ft) |
|
7. | Install in the reverse order of removal. •
| Make sure that the tailgate locks/unlocks and opens/closes properly. |
•
| Adjust the tailgate alignment. |
•
| Make sure the connectors are connected in properly. |
•
| Replace any damaged clips. |
|
|
Repair procedures
Adjustment
1. After loosening the tailgate hinge (A) mounting bolts, adjust the tailgate by moving it up and down, or right and left.
2. Adjust the tailgate height by turning ...
Components and components location
Component Location
1. Tailgate trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Other information:
Repair procedures
Removal
1. Remove the wheel tire (A).
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
2. Remove the luggage side trim.
(Refer to Body - "Luggage Side Trim")
3. Disconnect the rear wheel speed sensor con ...
If emergency towing is necessary, we
recommend having it done by an authorized
Kia dealer or a commercial
tow-truck service. Proper lifting and
towing procedures are necessary to
prevent damage to the vehicle. The use
of wheel dollies (1) or flatbed is recommended.
It is acceptable to ...