Kia Picanto: Starting System / Starter Relay

Kia Picanto JA 2017-2024 Service & Repair Manual / Engine Electrical System / Starting System / Starter Relay

Repair procedures
Inspection
1.
Turn ignition switch OFF and disconnect the negative (-) battery terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay (A).

4.
Check for continuity between the terminals (30 and 87) using an ohmmeter.
Terminal
Resistance
Measure
30 - 87
1MΩ or higher
If there is continuity between the terminals, replace the relay.

5.
Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
Terminal
Resistance
Measure
30 - 87
1Ω or less
If there is no continuity between the terminals, replace the relay.

6.
Install the starter relay.
7.
Install the fuse box cover.
Starter
Specifications Specification Starter ▷12V, 1.2kW : ISG only Item Specification Rated voltage 12 V, 1.2 kW The number ...

Cruise Control System
Description and operation Description The cruise control system is engaged by the cruise "ON/OFF" main switch located on right of steering wheel column. The system has the capability to cr ...

Other information:

Kia Picanto JA 2017-2024 Owner's Manual: Operation of the rear parking assist system


Operating condition This system will activate when backing up with the ignition switch ON. If the vehicle is moving at a speed over 5 km/h (3 mph), the system may not be activated correctly. The sensing distance while the rear parking assist system is in operation is approxim ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Sunroof Sunshade


Repair procedures Replacement 1.Remove the sunroof assembly. (Refer to Sunroof - "Sunroof Assembly") 2.Remove the drip rail assembly (A) after loosening the mounting screws. 3.Separate the rear drip (A) after loosening the mounting screws. 4.Remove the stopper (A) b ...

Copyright © www.kpicanto.com 2017-2024