Kia Picanto: Light bulbs / Side repeater lamp (bulb type) bulb Replacement

Kia Picanto JA 2017-2025 Owner's Manual / Maintenance / Light bulbs / Side repeater lamp (bulb type) bulb Replacement

1. Remove the lamp assembly from the vehicle by prying the lens and pulling the assembly out.

2. Disconnect the bulb electrical connector.

3. Separate the socket and the lens parts by turning the socket counterclockwise until the tabs on the socket align with the slots on the lens part.

4. Remove the bulb by pulling it straight out.

5. Insert a new bulb in the socket.

6. Reassemble the socket and the lens part.

7. Connect the bulb electrical connector.

8. Reinstall the lamp assembly to the body of the vehicle.

Side repeater lamp (LED type) bulb Replacement

If the Side repeater lamp (1) does not operate, have your vehicle checked by a professional workshop. Kia recommends to visit an authorized Kia dealer/ service partner. ...

Stop and tail lamp bulb replacement

1. Open the tailgate. 2. Loosen the light assembly retaining screws with a cross-tip screwdriver. 3. Remove the rear combination lamp assembly from the body of the vehicle. 4. Disconnect th ...

Other information:

Kia Picanto JA 2017-2025 Service & Repair Manual: Heated Oxygen Sensor (HO2S)

Specifications Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.5 - 4.0 [20°C(68°F)] Type Linear Pin 6 HO2S [Bank 1/Sensor 2] Item ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Parking Assist Sensor

Components and components location Components Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the rear bumper assembly. (Refer to Body - "Rear Bumper Assembly") 3.Disconnect the connector (A) from the ultrasonic sensor. ...