Kia Picanto: Interior Trim / Rear Transverse Trim
Components and components location
Repair procedures
Put on gloves to protect your hands. |
•
| Use a plastic panel removal tool to remove interior trim pieces without marring the surface. |
•
| Be careful not to bend or scratch the trim and panels. |
|
1. | Remove the luggage board (A).
|
2. | Disconnect the tailgate weatherstrip. |
3. | Remove the rear transverse trim (A).
|
4. | Install in the reverse order of removal. Make sure that the connector is plugged in properly. |
|
Components and components location
Component Location
1. Center pillar lower trim 2. Center pillar upper trim
Repair procedures
Replacement
Put on glo ...
Components and components location
Component Location
1. Luggage side trim
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Other information:
Repair procedures
Removal and Installation
1.Disconnect the negative battery terminal.
2.Remove the engine room under cover and RH side cover.
(Refer to Engine and Transaxle Assembly - “Engine Room Under Cover”)
3.Drain the coolant.
(Refer to Cooling System - ...
Components and components location
Component Location
1. Front seat cushion cover
...