| Removal |
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the rear combination lamp (A) after loosening the screws.
|
| 3. | Remove the rear combination lamp packing (A).
|
| 4. | Disconnect the rear combination lamp connector (A).
|
| 1. | Disconnect the negative (-) battery terminal. |
| 2. | Remove the rear bumper assembly.
(Refer to Body - "Rear bumper Assembly")
|
| 3. | Disconnect the back up lamp connector (A).
|
| 4. | Remove the back up lamp (A) after loosening the screws.
|
| Bulb Replacement |
| 1. | Remove the rear combination lamp. |
| 2. | Remove the turn signal lamp bulb (B) by turning the socket (A) counterclockwise.
|
| 1. | Remove the rear tire. |
| 2. | Remove the rear wheel guard (A) after loosening the mounting screws and clips.
|
| 3. | Remove the back up lamp bulb (B) by turning the socket (A) counterclockwise.
|
| Installation |
| 1. | Connect the rear combination lamp connector. |
| 2. | Install the rear combination lamp. |
| 3. | Connect the negative (-) battery terminal. |
| 1. | Install the back up lamp. |
| 2. | Install the rear bumper assembly. |
| 3. | Connect the negative (-) battery terminal. |
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate. 3. Loosen the high mounted stop lamp mounting nuts (A).
Specifications Specifications Items Specifications Rated voltage DC 12 V Operating temperature range -22 - 176°F (-30 - 80°C) Rated load Washer Washer : 6A (Motor load) Components and components location Component 1 .
Components and components location Components Description and operation Description The ECM (Electro Chromatic inside rear view Mirror) is one that automatically dims to protect the driver’s eyes when it senses light reflecting from the car behind.
Components and components location Component The eCall unit for AVN is equipped in AVN head unit. Repair procedures Removal Carry out the Test Mode in the following cases.– Replacing the eCall unit– Replacing the Bac