Kia Picanto: Blower / Power Mosfet

Kia Picanto JA 2017-2024 Service & Repair Manual / Heating,Ventilation, Air Conditioning / Blower / Power Mosfet

Repair procedures
Inspection
1.
Ignition "ON"
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.

Fan
Motor Voltage
Manual
First speed
3.8 ±0.5V
Second speed
5.0 ±0.5V
Third speed
6.2 ±0.5V
Fourth speed
7.4 ±0.5V
Fifth speed
8.6 ±0.5V
Sixth speed
9.8 ±0.5V
Seventh speed
11.0 ±0.5V
eighth speed
Battery

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Disconnect the connector (A) and then remove the power mosfet (B) after loosening the mounting screws.

4.
Install in the reverse order of removal.
Blower Resistor (Manual)
Repair procedures Inspection 1.Measure terminal - to - terminal resistance of blower resistor. 2.measured resistance is not within specification, the blower resistor must be replaced. (After re ...

Climate Control Air Filtar
Description and operation Description This has particle filter which eliminates foreign materials and odor. The particle filter includes odor filter as well as conventional dust filter to ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Rear Door Trim


Components and components location Component Location 1. Rear door trim Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove interior t ...

Kia Picanto JA 2017-2024 Owner's Manual: Smart key precautions


NOTICE If, for some reason, you happen to lose your smart key, you will not be able to start the engine. Tow the vehicle, if necessary, contact a professional workshop. Kia recommends to contact an authorized Kia dealer/service partner. A maximum of 2 smart keys can be reg ...

Copyright © www.kpicanto.com 2017-2024