Kia Picanto: Rear Parking Assist System / Parking Assist Sensor

Kia Picanto JA 2017-2024 Service & Repair Manual / Body Electrical System / Rear Parking Assist System / Parking Assist Sensor

Components and components location
Components

Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper assembly.
(Refer to Body - "Rear Bumper Assembly")
3.
Disconnect the connector (A) from the ultrasonic sensor.

4.
Pull out ths ultrasonic sensor (A) by opening the sensor holder (B) out.

Installation
1.
Install the ultrasonic sensor and connector.
2.
Install the rear bumper assembly.
3.
Connect the negative (-) battery terminal.
Rear Parking Assist System
Specifications Specification Item Specification Ultrasonic sensor Voltage rating DC 12V Detecting range 11.8 - 39.3 in (30 - 100 ...

Rear Wiper/Washer
Components and components location Component Location 1 . Rear wiper arm & blade 2 . Rear wiper arm nut 3 . Rear wiper grommet 4 . Rear wiper motor assembly 5 . Rear wiper motor bolt ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Power Door Mirror Switch


Components and components location Component Schematic diagrams Circuit Diagram [Folding Mirror Type] [Non-Folding Mirror Type] Repair procedures Inspection 1.Check for continuity between the terminals in each switch position according to the table. ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Rear Wheel Speed Sensor


Repair procedures Removal 1. Remove the wheel tire (A). Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) 2. Remove the luggage side trim. (Refer to Body - "Luggage Side Trim") 3. Disconnect the rear wheel speed sensor con ...

Copyright © www.kpicanto.com 2017-2024