Other information:
Repair procedures
Inspection
1.Disconnect the negative (-) battery terminal.
2.Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
3.Remove the glass motor (A) after loosening the mounting screws.
4.Ground the terminals as below table, and check t ...
Components and components location
Components
[Disc type]
1. Torsion beam axle 2. Brake disc 3. Brake caliper
[Drum type]
1. Torsion beam axle 2. Drum brake
Repair procedures
Replacement
1.Switch "OFF" ignition and disconnect the negative (-) battery terminal ...