Kia Picanto: Light bulbs / License plate lamp bulb
replacement
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp
housing.
2. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the
socket align with the slots on the
assembly.
3. Remove the bulb from bulb-socket
by pulling it out.
4. Insert a new bulb by inserting it into
the bulb-socket.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
6. Align the lens cover tabs with the
lamp housing notches and snap the
lens into place.
If the high mounted stop lamp (1) does
not operate, have your vehicle checked
by a professional workshop. Kia recommends
to visit an authorized Kia dealer/
service partner. ...
1. Using a flat-blade screwdriver, gently
pry the lens cover from lamp
housing.
2. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the
socket ...
Other information:
OFF
• With manual transaxle
To turn off the engine
(START/RUN position) or
vehicle power (ON position),
stop the vehicle
then press the ENGINE START/STOP
button.
• With automatic transaxle
To turn off the engine (START/RUN
position) or vehicle power (ON position),
press the E ...
Specifications
Specification
▷ AGM50L-DIN
Item
Specification
Capacity [20HR / 5HR] (AH) 50/40 Cold Cranking Amperage (A) 560 (SAE) / 560(EN) Reserve Capacity (Min) 80
•
...