Kia Picanto: Body Electrical System / Horn
Components and components location
1. Horn switch 2. Horn relay
| 3. Horn 4. Clock spring
|
Repair procedures
1. | Disconnect the negative (-) battery terminal. |
2. | Remove the engine room under cover.
G 1.0 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")
G 1.2 MPI (Refer to Engine Mechanical System - "Engine Room Under Cover")
|
3. | Remove the horn (A) after disconnecting the horn connector (B) and loosening the mounting the bolt.
|
1. | Install the horn after connecting the horn connector. |
2. | Install the engine room under cover. |
3. | Connect the negative (-) battery terminal. |
1. | The relay on the horn of this vehicle is built into the engine room relay block. |
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
1.Disconnect the negative (-) battery terminal.
2.Remove the crash pad lower panel.
(Refer to Body - "Cras ...
Repair procedures
Inspection
1.Disconnect the key warning switch connector (A) and ignition switch connector (B) from the steering column.
2.Check for continuity between the terminals.
3 ...
Other information:
Components and components location
Component Location
1. Rear seat cushion cover
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to r ...
Repair procedures
Inspection
•
Wrap
tin foil around the end of the voltmeter test lead to prevent damaging
the heater line. Apply pressure on the tin foil with hand and move the
tin foil along the grid line to check for open circuits. ...