Kia Picanto: Steering wheel / Heated steering wheel

Kia Picanto JA 2017-2024 Owner's Manual / Features of your vehicle / Steering wheel / Heated steering wheel

When the ignition switch is in the ON position, pressing the heated steering wheel button warms the steering wheel. The indicator on the button will illuminate.

To turn the steering wheel off, press the button once again. The indicator on the button will turn off.

It will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.

If you turn off the ignition within 30 minutes after pressing the steering wheel heater button, from next ignition ON, the heater will be OFF.

CAUTION

Do not install any grip to operate the steering wheel. This causes damage to the heated steering wheel system.
When cleaning the heated steering wheel, do not use an organic solvent such as paint thinner, benzene, alcohol and gasoline. Doing so may damage the surface of the steering wheel.
If the surface of steering wheel is damaged by sharp object, damage to the heated steering wheel components could occur.

Tilt steering

A tilt steering wheel allows you to adjust the steering wheel before you drive. You can also raise it to give your legs more room when you exit and enter the vehicle. The steering wheel shou ...

Horn

To sound the horn, press the horn symbols on your steering wheel. Check the horn regularly to be sure it operates properly. NOTICE To sound the horn, press the area indicated by the horn s ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Smart Key

Repair procedures Smart Key Smart Key Code Saving 1. Connect the DLC cable of KDS/GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on KDS/GDS. 2. Select the vehicle model and then do "Smart key code saving". 3. After selecting "Smart ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Manual Transaxle Oil

Repair procedures Inspection Manual Transaxle Oil Level Check 1. Stop the engine and then raise the vehicle using the lift. 2. Remove the oil filler plug (A). 3. Check the condition of the oil and make sure that it is at the proper level (A). 4. Install the oil filler plug (A). ...