Kia Picanto: Lighting System / Hazard Lamp Switch

Kia Picanto JA 2017-2024 Service & Repair Manual / Body Electrical System / Lighting System / Hazard Lamp Switch

Repair procedures

Inspection

Check for continuity between terminals. If the continuity is not as specified, replace the hazard lamp switch.

No.	Description	No.	Description
1	Hazard lamp switch	4	Illumination (-)
2	Illumination (+)	5	-
3	-	6	Ground

Removal

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

•	When removing the interior trim pieces, use a plastic panel removal tool not to damage the surface.

•	Be careful to store and handle the crash pad when removing/installing because lubricant and oil can leave a stain on the trim.

1.	Disconnect the negative (-) battery terminal

2.	Remove the center fascia panal. (Refer to Body - "Center Fascia Panel")

3.	Remove the hazard lamp switch (A) by pushing both ends of the switch hooks.

Installation

1.	Install the hazard lamp switch.

2.	Install the center fascia panal.

3.	Connect the negative (-) battery terminal.

Map Lamp

Repair procedures Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver ...

Front Fog Lamps

Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3.Remove the front fog ...

Other information:

Kia Picanto JA 2017-2024 Service & Repair Manual: Speakers

Repair procedures Inspection Troubleshooting of the speakers When handling the speakers :• Do not cause shock to the speakers by dropping or throwing them.• Be careful not to drop water and oil on the speake ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Clutch Switch

Specifications Specifications Item Specifications Working voltage DC 12.5V Operating force Initial position : 0.25 ± 0.15 N (0.025 ± 0.015 kg, 0.056 ± 0.034 lb) Full position : 0.8 ± 0.2 N (0.08 ± 0.02 kgf, 0.579 ± 0.0 ...