Kia Picanto: Features of your vehicle / Fuel filler lid
Opening the fuel filler lid

The fuel-filler lid must be opened from
inside the vehicle by pulling up on the
fuel-filler lid opener located on the
front floor area on the driver’s seat.
NOTICE
If the fuel filler lid will not open because
ice has formed around it, tap
lightly or push on the lid to break the
ice and release the lid. Do not pry on the lid. If necessary, spray around
the lid with an approved de-icer fluid
(do not use radiator anti-freeze) or
move the vehicle to a warm place
and allow the ice to melt.

1. Stop the engine.
2. To open the fuel filler lid, pull up the
fuel filler lid opener.
3. Pull the fuel filler lid (1) out to fully
open.
4. To remove the cap, turn the fuel
tank cap (2) counterclockwise.
5. Refuel as needed.
Closing the fuel filler lid
1. To install the cap, turn it clockwise
until it “clicks”. This indicates that
the cap is securely tightened.
2. Close the fuel filler lid and push it
lightly and make sure that it is securely
closed.
Opening the hood
1. Pull the release lever to unlatch the
hood. The hood should pop open
slightly.
WARNING
Open the hood after turning off the
engine on a flat surface, shifting the
shift ...
If your vehicle is FFV (Flex fuel vehicle),
it needs to be checked and the reservoir
should be filled in with the gasoline
for cold start when the outside temperature
is low (below 20°C).
...
Other information:
Components and components location
Component Location
1. Fuel filler door
Repair procedures
Replacement
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
1. Open the fuel filler door and then filler door c ...
The following maintenance services must be performed to ensure good emission
control and performance. Keep receipts for
all vehicle emission services to protect your warranty. Where both mileage and
time are shown, the frequency of service is
determined by whichever occurs first.
I: ...