Kia Picanto: Front Seat / Front Seat Frame Assembly

Kia Picanto JA 2017-2024 Service & Repair Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly

Components and components location

Component Location

1. Front seat back frame assembly

2. Front seat cushion frame assembly

Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front seat back cover. (Refer to Front Seat - "Front Seat Back Cover")

2.	Remove the front seat cushion cover. (Refer to Front Seat - "Front Seat Cushion Cover")

After loosening the mounting bolts, disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).

Tightening torque :

44.1 - 53.9 N·m (4.5 - 5.5 kgf·m, 32.5 - 39.8 lb·ft)

4.	Install in the reverse order of removal.

Front Seat Cushion Cover

Components and components location Component Location 1. Front seat cushion cover ...

Front Seat Belt

Components and components location Components 1. Front seat belt retractor 2. Height adjuster 3. Rear seat belt retractor 4. Rear seat belt buckle ...

Other information:

Kia Picanto JA 2017-2024 Owner's Manual: Instrument cluster control

Adjusting Instrument Cluster Illumination WARNING Never adjust the instrument cluster while driving. This could result in loss of control and lead to an accident that may cause death, serious injury, or property damage. The brightness of the instrument panel illumination is changed ...

Kia Picanto JA 2017-2024 Service & Repair Manual: Horn

Components and components location Component Location 1. Horn switch 2. Horn relay 3. Horn 4. Clock spring Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the engine room under cover. G 1.0 MPI (Refer to Engine Mechanical System ...