Kia Picanto: SRSCM / Front Impact Sensor (FIS)
Description and operation
| Description |
| • | The front impact sensor (FIS) is installed in the Front End Module (FEM). |
| • | FIS is a remote sensor that detects acceleration due to a collision at its mounting location. |
| • |
The primary purpose of the Front Impact Sensor (FIS) is to provide an
indication of a collision. The Front Impact Sensor (FIS) sends
acceleration data to the SRSCM. |
Components and components location
| Components |
| 1. Front Impact Sensor (FIS) |
Repair procedures
| Replacement |
| 1. | Disconnect the negative battery cable and wait for at least thirty seconds before beginning to work. |
| 2. | Remove the Head lamp.
(Refer to Body Electrical System - "Head Lamp")
|
| 3. | Make a gap by lossening the washer reservoir tank mounting bolt.
(Refer to Body Electrical System - "Front Washer Motor")
|
| 4. | Disconnect the front impact sensor connector (A). |
| 5. | Remove the front impact sensor (B) after loosening the mounting bolt.
|
| 6. | Install in the reverse order of removal. |
SRS Control Module (SRSCM)
Description and operation
Description
The
primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint
system de ...
Side Impact Sensor (SIS)
Description and operation
Description
•
Side Impact Sensor (SIS) system consists of two Pressure Side Impact
Sensor (P-SIS) installed at each center of the fro ...
Other information:
Kia Picanto JA 2017-2024 Service & Repair Manual: Clutch Tube
Components and components location Components [Kappa 1.0 T-GDI] 1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch regulator 5. Clutch tube Repair procedures Removal 1.Turn ignition switch OFF and disconnect the negative (-) battery ...
Kia Picanto JA 2017-2024 Owner's Manual: Engine coolant (Kappa 1.0L MPI (Gasoline, FFV), Kappa 1.2L MPI)
The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a year, at the beginning of the winter season, and before traveling to a colder climate. C ...
Copyright © www.kpicanto.com 2017-2024
