Kia Picanto: Fuel Delivery System / Filler-Neck Assembly
Kia Picanto JA 2017-2025 Service & Repair Manual / Engine Control / Fuel System / Fuel Delivery System / Filler-Neck Assembly
Repair procedures
| Removal |
| 1. | Open the fuel filler door and then remove the filler-neck mounting bolts (A).
|
| 2. | Left the vehice. |
| 3. | Remove the rear-LH wheel, tire, and the inner wheel house. |
| 4. | Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
|
| 5. | Remove the filler-neck assembly from the vehicle after removing the bracket intallation bolt (A).
|
| Installation |
| 1. | Installation is reverse of removal. |
Fuel Line
Repair procedures
Removal
Low Pressure Fuel Line [High pressure fuel pump ↔ Extension fuel line engine room side]
1.Release the residual pressure in fuel line.
(Reter to Fuel Deli ...
Delivery Pipe
Repair procedures
Removal
In
case of removing the high pressure fuel pump, high pressure fuel pipe,
delivery pipe, and injector, there may be injury caused by leakage ...
Other information:
Kia Picanto JA 2017-2025 Service & Repair Manual: Starting System
Description and operation Description The starting system consists of the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start posi ...
Kia Picanto JA 2017-2025 Owner's Manual: Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. NOTICE Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse panel in your vehi ...
Copyright © www.kpicanto.com 2017-2025
