Kia Picanto: Body (Interior and Exterior) / Fender

Kia Picanto JA 2017-2025 Service & Repair Manual / Body (Interior and Exterior) / Fender

Components and components location
Component Location

1. Fender assembly


Repair procedures
Replacement
   
Be careful not to damage the fender and body.
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
1.
Remove the headlamps.
(Refer to Front Bumper - "Front Bumper Assembly")
2.
Remove the front wheel guard.
(Refer to Body Side Molding - "Front Wheel Guard")
3.
Remove the front bumper side bracket (A) after loosening the screws.

4.
After loosening the mounting screws, bolts, and nut, remove the fender assembly (A).

5.
Install in the reverse order of removal.
   
Replace any damaged clips.
Cowl Cross Bar Assembly
Components and components location Component Location 1. Crash pad center lower panel Repair procedures Replacement    Put on gloves to protect your ...

Floor Carpet
Components and components location Component Location 1. Floor carpet assembly Repair procedures Replacement    Put on gloves to protect your hands. ...

Other information:

Kia Picanto JA 2017-2025 Owner's Manual: To resume cruising speed at more than approximately 30 km/h (20 mph)


If any method other than the cruise / CRUISE button was used to cancel cruising speed and the system is still activated, the most recent set speed will automatically resume when you move the lever up (to RES+). It will not resume, however, if the vehicle speed has dropped below approx ...

Kia Picanto JA 2017-2025 Service & Repair Manual: Speaker


Repair procedures Inspection Troubleshooting of the speakers    When handling the speakers :• Do not cause shock to the speakers by dropping or throwing them.• Be careful not to drop water and oil on the speake ...

Copyright © www.kpicanto.com 2017-2025