Kia Picanto (JA): Engine And Transaxle Assembly / Engine Room Under Cover

Repair procedures

Removal and Installation
Engine Room Under Cover
1.
Remove the engine room under cover (A).
Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

2.
Install in the reverse order of removal.
Engine Room Side Cover
1.
Remove the engine room side covers (A).
Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)
[LH]

[RH]

2.
Install in the reverse order of removal.

    Components and components location Components 1. Engine mounting bracket 2. Roll rod bracket 3. Transaxle mounting bracket Repair procedures Removal and Installation Engine Mounting Bracket 1.

    Other information:

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Windshield Wiper-Washer Switch

    Repair procedures Removal 1.Disconnect the negative (-) battery terminal. 2.Remove the steering column upper and lower shrouds after loosening the screws. (Refer to Body - "Steering Column Shroud Panal") 3.Disconnect the wiper switch / washer switch connector (A).

    Kia Picanto (JA) 2017-2026 Service & Repair Manual: Temperature Control Actuator

    Components and components location Component Location 1. Temerature Control Actuator Description and operation Description 1. Heater unit includes mode control actuator and temperature control actuator. 2. Temperature control actuator is located at the heater unit.

    Categories

     
    Copyright © 2026 www.kpicanto.com - 0.0214