Kia Picanto: ISG (Idle Stop & Go) System / Door switch
Description and operation
| Description |
Via
the seat belt/Door switch, the ISG function can detect that the driver
has fastened the seat belt/door. If the driver has not fastened the seat
belt/door, the ISG function reacts as follows. If the seat belt or door
is opened, the engine must not be started or stopped by the ISG
function for safety reasons.
Repair procedures
| Inspection |
| 1. | Remove the center pillar lower trim.
(Refer to Body - "Center Pillar Trim")
|
| 2. | Check for continuity between the terminal.
|
Brake switch
Components and components location
Components
1. Brake member assembly 2. Stop lamp switch 3. Brake pedal arm assembly 4. Brake pedal pad
Troubleshooting
Troubleshooting
1. ...
Seat belt switch
Components and components location
Component Location
1. Front seat belt buckle
Repair procedures
Replacement
1.Remove the front seat assembly.
(Refer to Front ...
Other information:
Kia Picanto JA 2017-2024 Owner's Manual: How vehicle audio works
FM reception AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached your veh ...
Kia Picanto JA 2017-2024 Owner's Manual: Non-operational conditions of rear parking assist system
The rear parking assist system may not operate properly when: 1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.) 2. The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normal ...
Copyright © www.kpicanto.com 2017-2024
